|  |
Click here for bigger image
 | | Product Name: | H2/SUT Warn Winch 9.5XP (for use with WARN Bumper) | | Our Price: | $1399.00 | | Availability: | In Stock | | Product Number: | 69502 | | Product Weight: | 75 lb. | | Rating: |  |
|  |
| Product Detail |
| H2/SUT Warn Winch 9.5XP (for use with WARN Bumper)
9.5xp SELF-RECOVERY WINCH The fast, powerful WARN 9.5xp is designed for the serious off-roader who demands a winch that will perform under the most extreme conditions in the world. With 9,500 lbs. of pulling power, the longest duty cycle and fastest line speed of any WARN winch under load, the 9.5xp delivers extreme performance that eats up the competition-even in competition.
The 9.5xp winch features an all new, High Output Parallel Series Wound winch motor that's the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding pulls. Full face contact drum seals, motor and end housing gaskets deliver extreme-duty water resistance. A high gloss, chip resistant powder coat finish over chromate coated alloys affords superior corrosion resistance.
9.5XP SPECS/PART NUMBERS Part Number: PN 68500 (12V DC) Rated Line Pull: 9500 lbs. (4310 kgs.) single-line Motor: 12V 6 hp, High Output Parallel Series Wound Remote Control: Remote switch, 12' (3.7m) lead, S2 elements, integrated flashlight Geartrain: 3-Stage Planetary Gear Ratio: 156:1 Lubrication: Aeroshell #17 Clutch (freespooling): Sliding Ring Gear Brake: Automatic Direct Drive Cone Wire Rope: 100', 5/16" diameter (30m, 8mm diam.) Fairlead: Roller Recommended Battery: 650 CCA minimum for winching Battery Leads: 2 gauge, 72" (1.83m) Finish: Chromate with high-gloss dark gray powder coat Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) Weight: 87 lbs. (39.5 kgs.)
12V DC PERFORMANCE SPECS Line Pull Lbs.(Kgs.) Line Speed FT./min(M/min.) Motor Current Pull by layer layer/Lbs(Kgs.) 0 38(11.6) 70 amps 1/9500(4313) 2000(910) 16.8(5.1) 175 amps 2/8650(4927) 4000(1818) 12.8(3.9) 262 amps 3/7920 (3595) 6000(2720) 10.1(3.1) 335 amps 4/7400(3359) 8000(3630) 8.8(2.7) 425 amps 5/6940(3150) 9500(4310) 7.6(2.3) 480 amps
Above performance specs are based on first layer of drum
Winch Dimensions: 22.7" L. x 6.3" D. x 7.7" H. (577mm L. x 160mm D. x 196 mm H) Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
****FOR USE WITH THE WARN BUMPER KIT****
| | Show Related Products |
QUICK LINKS
Hummer Sale Parts
|
Newest H2 Accessories |
Hummer Antenna Parts |
Hummer Brush Guards |
Hummer Accessory Kits |
Hummer Bumper Parts |
Hummer Door Parts |
Hummer Electronics |
Hummer Fender Flares |
Hummer Fuel Doors |
Hummer Hood Handles |
Hummer Hood Latches |
Air Vents & Covers |
Hummer Interior Parts |
Hummer Lettering |
Hummer Lighting |
H2/SUT Light Surrounds |
Hummer Liners & Mats |
Hummer Mini Grills |
Hummer Mudguards |
Hummer Side Steps |
Hummer Off-Road |
Hummer Performance |
H2 Rear Hatch Handles |
Hummer Rear Vents |
Hummer Roof Racks |
Hummer Side Vents |
Hummer Speaker Rings |
Hummer Suspension |
Tail Light Guards |
Hummer Tire Covers |
Hummer Tow Hooks |
Hummer Wheels
Email Us at:
Sales@PaladinAuto.com
www.PaladinAuto.com
TEL: 480-982-AUTO (2886)
VoiceMail: 480-288-5701
Product design and specifications are subject to change in accordance with our
policy of continual improvement.
HUMMER and H1, H2, H3, H3T, SUT, HX are registered trademarks of
General Motors Corporation and
are used for identification purposes only.
Paladin Auto nor www.PaladinAuto.com -
www.H2HummerAccessories.com -
www.H3HummerAccessories.com -
www.FJCruiser-Accessories.com and its products are not affiliated with
GM General Motors
or any of General Motors affiliated companies and is not affiliated with General
Motors in
any way.
|
